IXIO-D

Opening and safety sensor for automatic sliding doors

Technology Radar & Active Infrared

Colours:

Description

The IXIO-D is a sensor which combines radar technology for the activation of the door and infrared technology for the user protection. The unidirectional radar enables energy savings to be made. The three-dimensional infrared curtain protects people from any contact with the doors. Thanks to the LCD screen and the BEA DECODER app sensor configuration has never been easier.

Features

Energy-saving

Due to the unidirectionality, the duration of the door opening cycle is shorter, which reduces heat loss from the building and saves energy. This also optimises the “airlock” function.

Intuitive configuration

bea-ixio-d-installation-adjustment-configuration

Intuitive configuration with an LCD screen displaying texts and symbols (LCD graphics). Quick & easy overview of all settings via the BEA decoder app.

Visual aids

bea-ixio-d-floor-installation-adjustment

4 red spotlights visible on the floor to adjust the angle of the failsafe curtain.

Stable & reliable

A 32-bit microprocessor optimises the processing of information coming from the environment, ensuring a stable performance throughout the year. 48 high-density infrared spotlights from 2 curtains protect users from any contact with the doors.

Detection field

Table of specifications

Supply voltage:	12 V - 24 V AC +/-10% ; 12 V - 30 V DC +/-10% (to be operated from SELV compatible power supplies only)
Power consumption:	< 2.5 W
Mounting height:	2 m to 3.5 m (local regulations may have an impact on the acceptable mounting height)
Temperature range:	-25°C to +55°C; 0-95% relative humidity, non condensing
Degree of protection:	IP54
Noise:	< 70 dB
Expected lifetime:	20 years
Detection mode:	Motion Min. detection speed: 5 cm/s	Presence Typical response time: < 200 ms (max. 500 ms)
Technology:	Microwave doppler radar Transmitter frequency: 24.150 GHz Transmitter radiated power: < 20 dBm EIRP Transmitter power density: < 5 mW/cm2	Active infrared with background analysis Spot: 5 cm x 5 cm (typ) Number of spots: max. 24 per curtain Number of curtains: 2
Output:	IXIO-DT1/-DP1 Solid-state-relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC IXIO-DT3/DP3 Solid-state-relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC In switching mode: NO/NC In frequency mode: pulsed signal (f= 100 Hz +/- 10%) Galvanically isolated current source No detection: current source ON Open circuit voltage: 6.5 V Output voltage available at 10 mA: 3 V min. Typical load: up to 3 optocouplers in series Detection: current source OFF Open-circuit remained voltage: < 500 mV	IXIO-DT3/-DT1 Solid-state-relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC Holdtime: 0.3 to 1 s IXIO-DP3/-DP1 Pulse polarity: negative Level: - Standby: Pulse from V to ground - Detection: V Supply Topology: op-collector with 4.7 K to 3.3 V Max. sink current: 25 mA with external 1 K to 24 V
Input:		IXIO-DP3/-DP1 Pulse polarity: positive or negative (adjustable) Impedance: - Positive pulse: 2 K to ground - Negative pulse: 470 R to + sensor power supply Pulse voltage: 6 V to 30 V Pulse duration: 4 μs to 500 μs Duty cycle: max. 50%
Test input:		IXIO-DT3/-DT1 Sensitivity: Low: < 1 V; High: > 10 V (max. 30 V) Response time on test request: typical: < 5 ms
Norm conformity:	This product conforms to all applicable European Union legislation. Please refer to the Declaration of Conformity for further information.

Specifications are subject to changes without prior notice – Measured in specific conditions.

Versions

IXIO-DT3

sensor with external monitoring for emergency exits
IXIO-DT1

sensor with external monitoring
IXIO-DP3

sensor with external monitoring for emergency exits with pulsed safety door controls
IXIO-DP1

sensor with external monitoring for pulsed safety door controls
IXIO-D CAN

sensor with CAN wiring

Accessories

BEA REMOTE CONTROL

Universal remote control for the adjustments of our sensors.

See the product
SPOTFINDER

Tool for visualising the exact position of infrared curtains.

See the product
IXIO BATT. 9V CONNECTOR

9 V Battery accessory

See the product
IXIO SMART DAISY CHAIN HUB

Hub for smart daisy chain connection of IXIO

See the product
IXIO CA

Ceiling accessory for the IXIO range

See the product
IXIO/VIO RA

Rain accessory for the IXIO & VIO range

See the product
IXIO/VIO/4SAFE INTERFACE

Interface for the IXIO/VIO/4SAFE

See the product
IXIO-D DOORBELL

Doorbell accessory for the IXIO-DT3 & IXIO-DP3

See the product
IXIO-D DOORBELL INTERFACE

Doorbell interface for the IXIO-DT3 & IXIO-DP3

See the product
IXIO-D DOORBELL KIT

Doorbell + doorbell interface for the IXIO-DT3 & IXIO-DP3

See the product
IXIO-D/VIO BA

Bracket Accessory for the IXIO-D & VIO range

See the product
IXIO-D/VIO-D CDA

Curved door accessory for the IXIO-D & VIO-D range

See the product
IXIO-DT3/DP3 RETROFIT INTERFACE

Retrofit interface for the IXIO-DT3 & IXIO-DP3

See the product
MULTI-SENSOR HUB

Hub for daisy chain connection of 4SAFE & IXIO

See the product

INSTALLATION

Videos

Downloads