IXIO-S

Safety sensor for automatic sliding doors

Technology Active Infrared

Colours:

Description

IXIO-S is an active infrared safety sensor. The tridimensional area of its infrared curtain protects the users from any contact with the doors. Adjustment is made easier with an LCD screen offering 10 different widths of curtains, to cover the full travel area of the door. The IXIO-S range can be combined with the IXIO-D range to ensure the side screen safety of sliding doors.

Download the commercial sheet

Features

Easy configuration of detection field

10 possible widths of IR curtains, for optimum coverage of of IR curtains, for optimum coverage of the door opening.

Intuitive configuration

Intuitive configuration with with an LCD screen displaying texts and symbols (LCD graphics).

bea-ixio-s-floor-installation-adjustment

Visual aids

4 red spotlights visible on the floor to adjust the angle of the failsafe curtain.

Stable & reliable

A 32-bit microprocessor optimises the processing of information coming from the environment, ensuring a stable performance throughout the year. 48 high-density infrared spotlights from 2 curtains protect users from any contact with the doors.

Detection field

Technical specifications

Supply voltage	12 V - 24 V AC +/-10% ; 12 V - 30 V DC +/-10% (to be operated from SELV compatible power supplies only)
Power consumption	< 2.5 W
Mounting height	2 m to 3.5 m (local regulations may have an impact on the acceptable mounting height)
Temperature range	-25°C to +55°C; 0-95% relative humidity, non condensing
Degree of protection	IP54
Noise	< 70 dB
Expected lifetime	20 years
Detection mode	Presence
Typical response time	< 200 ms (max. 500 ms)
Technology	Active infrared with background analysis
Spot	5 cm x 5 cm (typ)
Number of spots	max. 24 per curtain
Number of curtains	IXIO-ST: 2 IXIO-ST SIDE SCREEN: 1
Output	IXIO-ST Solid-state-relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC Holdtime: 0.3 to 1 s IXIO-SP Pulse polarity: negative Level: standby: pulse from V to ground Level: detection: V supply Topology: op-collector with 4.7 K to 3.3 V Max. sink current: 25 mA with external 1 K to 24 V Optional: Solid-state-relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC
Test input:	IXIO-ST Sensitivity: Low: < 1 V; High: > 10 V (max. 30 V) Response time on test request: typical: < 5 ms IXIO-SP Pulse polarity: positive or negative (adjustable) Impedance: Positive pulse: 2 K to ground Negative pulse: 470 R to + sensor power supply Pulse voltage: 6 V to 30 V Pulse duration: 4 μs to 500 μs Duty cycle: max. 50%
Norm conformity:	This product conforms to all applicable European Union legislation. Please refer to the Declaration of Conformity for further information.

Specifications are subject to changes without prior notice – Measured in specific conditions.

Versions

IXIO-ST

safety sensor with external monitoring
IXIO-ST 270

safety sensor with external monitoringg – same width as IXIO-D
IXIO-SP

safety sensor with external monitoring for pulsed safety door controls
IXIO-S CAN

safety sensor with CAN wiring

Accessories

SPOTFINDER

Tool for visualising the exact position of infrared curtains.

See the product
BEA REMOTE CONTROL

Universal remote control for the adjustments of our sensors.

See the product
IXIO BATT. 9V CONNECTOR

9 V Battery accessory

See the product
IXIO/VIO RA

Rain accessory for the IXIO & VIO range

See the product
IXIO-S BA

Bracket accessory for the IXIO-S

See the product
IXIO-S CDA

Curved door accessory for the IXIO-S

See the product
IXIO-S CA

Ceiling accessory for the IXIO-S

See the product

Downloads