LZR®-FLATSCAN SW

Safety sensor for swing doors

Technology Laser

Colours:

Description

The easy-to-install FLATSCAN SW uses time-of-flight laser technology for swing doors to generates 170 measurement points that provide a complete protection for swing doors and their users. A single FLATSCAN SW covers the entire door wing including the hinge area. Discover our product web page dedicated to the Flatscan SW

Features

Compact design

The FLATSCAN SW can be used on any size of swing door. Thanks to its compact
design (8.5 cm × 14.2 cm) it can be stocked and stored easily.

Independent of floor and surroundings

Laser technology guarantees independence of all type of flooring (slatted floors, wire mesh, absorbent carpet, reflective flooring, slippery surface, etc.) and the direct surroundings of the door (handrail, walls, radiators, dustbins, etc.).

Pinch zone safety

The FLATSCAN SW covers the hinge area of a door to protect hands and fingers during the closing process. It counts 100 points, divided over 16° in the pinch zone.

Fast & intuitive installation

The size of the sensor area is defined by hand movement. Products do not have to be cut anymore to fit the doorframe.

Detection Field

Table of specifications

Technology	LASER scanner, time-of-flight measurement
Detection mode	Presence
Max. detection range	4 m (diagonal) with reflectivity of 2% (i.e. : at W = 1.5m -> max. H = 3.7 m)
Opening angle	Door wing safety: 90° / Pinch zone safety: 16°
Angular resolution	Door wing safety: 1.3°/ Pinch zone safety: 0.2°
Typ. min. object size	Door wing safety: 10 cm @ 4m (in proportion to object distance, DIP 2 = ON) Pinch zone safety: 2 cm @ 4m (in proportion to object distance, DIP 2 = ON
Testbody	700 mm × 300 mm × 200 mm (testbody CA according to EN 16005 & DIN 18650)
Emission characteristics	IR LASER: Wavelength 905 nm; max. output pulse power 25 W; Class 1
Supply voltage	12 - 24 V DC ± 15 %
Power consumption	≤ 2 W
Response time	Door wing safety: max. 50 ms / Pinch zone safety: max. 90 ms
Output Max. switching voltage Max. switching current	2 electronic relays (galvanic isolation - polarity free) 42V AC/DC 100 mA
LED-signals	1 bi-coloured LED: detection/output status
Dimensions	142 mm (L) × 85 mm (H) × 33 mm (D) ( mounting bracket + 7 mm )
Material - Colour	PC/ASA - Black - Aluminium - White
Tilt angles	+2° à +10° (without mounting bracket)
Protection degree	IP54 (EN 60529)
Temperature range	-30°C to +60°C if powered
Humidity	0-95 % non-condensing
Vibrations	< 2 G
Min. door wing speed	2°/sec
Norm conformity	This product conforms to all applicable European Union legislation. Please refer to the Declaration of Conformity for further information.

Specifications are subject to changes without prior notice – Measured in specific conditions.

Versions

LZR®-FLATSCAN SW kit left+right

LZR®-FLATSCAN SW kit left+right
LZR®-FLATSCAN SW left

LZR®-FLATSCAN SW left
LZR®-FLATSCAN SW right

LZR®-FLATSCAN SW right
LZR®-FLATSCAN SW CAN

LZR®-FLATSCAN SW CAN

Accessories

LZR®-FLATSCAN FDA

Fire door adapter for the FLATSCAN

See the product
LZR®-FLATSCAN RETROFIT INTERFACE

Retrofit accessory the FLATSCAN

See the product
LZR®-FLATSCAN PROTECTIVE COVER

Protective cover for the FLATSCAN

See the product
BEA REMOTE CONTROL

Universal remote control for the adjustments of our sensors.

See the product
LZR®-FLATSCAN GDA

Glass door accessory for the FLATSCAN

See the product
LZR®-FLATSCAN SW TILTED MOUNTING BASE

LZR®-FLATSCAN accessory kit for pivot doors

See the product

Installation tutorial

Videos

Downloads