Supply voltage*: |
12V to 24V AC ±10% (50 - 60 Hz); 12V to 24V DC +10% / -3% |
|
|---|---|---|
Power consumption: |
< 3.5 W / VA |
|
Output*: |
2 relays (free of potential change-over contact) |
|
Output holdtime: |
0.5 s |
|
Mounting height: |
CONDOR: 3.5 m - 6 m; CONDOR XL: 2 m - 3.5 m* |
|
Temperature range: |
from -30 °C to + 60 °C (except for cold storage) |
|
Humidity: |
0 - 95% non condensing |
|
Degree of protection: |
IP65 |
|
Dimensions: |
127 mm (L) x 102 mm (H) x 96 mm (W) |
|
Materials: |
ABS and polycarbonate |
|
Weight: |
400 g |
|
Cable lenght: |
10 m |
|
Technology: |
microwave doppler radar |
active infrared |
Transmitter frequency/wavelength: |
24.150 GHz |
875 nm |
Transmitter power density: |
< 5 mW/cm² |
< 250 mW/m² |
Detection mode: |
motion |
motion & presence |
Detection field**: |
CONDOR: 4 x 5 m |
4 m x 4 m (emitting spots)*** |
Min. detection speed: |
5 cm/s |
5 cm/s to activate detection |
Reaction time: |
100 ms |
250 ms |
Tilt angle: |
-8° - 22° (relative to sensor front face) |
15° - 45° |
Norm conformity: |
This product conforms to all applicable European Union legislation. Please refer to the Declaration of Conformity for further information. |
* External electrical sources must be within specified voltages, max 15W and ensure double insulation from primary voltages.
** measured at 30°, field size 9, mounting height: 5 m, XL: 3.5 m
*** zone detected by spotfinder, slightly bigger than actual detection field
Specifications are subject to changes without prior notice – Measured in specific conditions.