airporthospitalsindustrylogisticsretailArtboardempowermentAsset 1Asset 2innovationbrochureGroup 11productpassionproductsrespectAsset 3Combined ShapeteamworkArtboard@2xGroup 11whitepaperwiring-diagramsfacebookinstagramlinkedintwitterwechatYouku-iconyoutubeco2flexible rapidespiralsectionnelspiral rapideenergywalletArtboardarrowarrow-redux-bigarrow-redux-toparrow-redux-toparrow-reduxarrowArtboard@2xcountrydownloadeyefile2filtergridhamburgerlanguagelistnopdfphoneplusresetsearchsubscribevideoyesArtboard@2xi-access-controli-access-controli-artwork-protectioni-automated-windowsi-barrier-freei-barriersi-bus-doorsfooi-crosswalki-emergency-calli-escalatorsi-flammablei-gatesi-guidancei-high-performance@1x-100Asset 2innovation_iconi-knowing-acti-loading-docki-low-energy-doorfooi-parkingi-pass-through-windowi-people-countingi-perimeter-protectioni-plateform-screen-doori-request-to-exiti-revolving-doori-sectional-doorAsset 3i-sliding-doorsi-swinging-doorsi-toll-gatesGroup 15i-train-doorsi-vehicle-classificationi-warehousingi-low-energy-doori-request-to-exit

We've detected you are coming from another region. Please choose one of the options:

Please select your preferred market and language

Go
Or

Table of specifications

Technology

Microwave

Transmitter frequency

24.15 GHz

Transmitter radiated power

< 20 dBm EIRP

Transmitter power density

< 5 mW/cm²

Detection mode

Motion

Max. detection range

Wide : 4 m x 2 m | Narrow : 2 mx 2.2 m @2.2 m high

Minimum detection speed

5 cm/s

Supply voltage**

12V to 24V AC ±10%; (50 to 60 Hz )12V to 24V DC +30% / -10%*

Max. power consumption

< 1 W

Output**
Max. switching voltage
Max. switching current

Solid-state relay (free of polarity)
30V AC / 42V DC
100 mA (resistive)

Mounting height

from 1.8 m to 4 m

Degree of protection

IP54

Temperature range

from -20°C to +55°C

Dimensions

120 mm (W) x 50 mm (H) x 50 mm (D)

Tilt angles

0° to 90° vertical; -30° to +30° lateral

Housing material

ABS

Weight

120 g

Cable length

2.5 m

Norm conformity

This product conforms to all applicable European Union legislation.
Please refer to the Declaration of Conformity for further information.

* The Equipment must be powered by an approved Class II SELV limited power source. This requirement consists of the need for double insulation between primary voltages and the Equipment supply. The supply current should be limited to max 3A.
** External electrical sources must be within specified voltages, max 15W and ensure double insulation from primary voltages.

Specifications are subject to changes without prior notice – Measured in specific conditions.

need more information Contact us

Subscribe to our newsletter

Learn more