LZR®-FLATSCAN REV LZ

Safety sensor for revolving doors

Technology Laser

Colours:

Description

The LZR®-FLATSCAN REV-LZ is a safety sensor based on laser technology. The sensor covers the entire door leaf and is used on different types of revolving doors.

Features

Full coverage of the leaf zone

The LZR®-FLATSCAN REV-LZ covers the door wing.
It protects people from any contact with the rotating leaf.

Fast & intuitive installation

The size of the sensor area is defined by simple hand movements, which leads to installation time savings.

Independent of flooring and surroundings

Laser Time-of-flight technology guarantees independence of all type of flooring and the direct surroundings of the door.

Compact design

The LZR®-FLATSCAN REV-LZ can be used on all revolving doors, regardless of their size. Thanks to its compact design, it can be stocked and stored easily.

Detection Field

Table of specifications

Technology	LASER scanner, time-of-flight measurement
Detection mode	Presence
Max. detection range	4 m (diagonal) with reflectivity of 2% (i.e.: at W = 1.5m -> max. H = 3.7 m)
Opening angle	90°
Angular resolution	1.3°
Typ. min. object size	10 cm @ 4m (in proportion to object distance, DIP 2 = ON)
Testbody	700 mm × 300 mm × 200 mm (testbody CA according to EN 16005 & DIN 18650-1)
Emission characteristics	IR LASER: wavelength 905 nm; average output power 0.05 mW; CLASS 1(IEC/EN 60825)
Supply voltage	12 - 24 V DC ± 15 % (The Equipment must be powered by an approved Class II SELV limited power source. This requirement consists of the need for double insulation between primary voltages and the Equipment supply)
Power consumption	≤ 2 W
Response time	50 ms
Output Max. switching voltage Max. switching current	2 electronic relays (galvanic isolation - polarity free) 42V AC/DC 100mA
LED-signals	1 bi-coloured LED: detection / output status
Dimensions	142 mm (L) × 85 mm (H) × 33 mm (D) ( mounting base + 7 mm )
Material - Colour	PC/ASA - Black - Aluminum - White
Tilt angles	+2° to +10° (without mounting base)
Protection degree	IP54 (IEC/EN 60529)
Humidity	0-95 % non-condensing
Vibrations	< 2 G
Compliance	This product conforms to all applicable European Union legislation. Please refer to the Declaration of Conformity for further information.

Specifications are subject to changes without prior notice – Measured in specific conditions.

Accessories

LZR®-FLATSCAN GDA

Glass door accessory

See the product
LZR®-FLATSCAN SW TILTED MOUNTING BASE

LZR®-FLATSCAN accessory kit for pivot doors

See the product
LZR®-FLATSCAN RETROFIT INTERFACE

Retrofit accessory the FLATSCAN

See the product
LZR®-FLATSCAN PROTECTIVE COVER

Protective cover for the FLATSCAN

See the product

Installation

.• 1 sensor secures the whole door leaf, regardless of its size.
• The mechanical angle can be adjusted from 2° to 10° and even further thanks to accessories.
• Automatic teach-in: direct surroundings of the door and the type of floor.

Videos

Downloads