Contactless opening solution for retail, clean rooms, operating theatres, logistics, hotels and restaurants.
Flush-mounted installation and discrete front face to blend into any environment
Easy opening solution for low energy doors used by people with disabilities.
Possibility to keep a door open or to turn a light on and off.
Technology: |
Microwave motion sensor |
|
---|---|---|
Radiated frequency: |
24.150 GHz |
|
Radiated power density: |
< 5 mW/cm² |
|
Detection range: |
+/- 10 to 50 cm if movement towards sensor at 90° (adjustable |
|
Detection mode: |
Motion (bidirectional) |
|
Speed of target to create detection: |
Min. 5Hz or +/- 3 cm/s, Max. 200 Hz or +/- 1.2 m/s |
|
Supply voltage: |
12V - 24V AC ± 10 %; 12V - 30V DC -5%/+10% |
|
Mains frequency: |
50 - 60 Hz |
|
Power consumption: |
< 1.2 W |
|
Output: |
Relay with switch-over contact (free of potential) |
|
Output hold time: |
0.5 s (in PULSE mode) |
|
Degree of protection: |
IP 30 with cable connected, IP40 flush-mounted without front face, IP52 flush-mounted with front face and silicone seal mounted in surface mount box |
|
Material: |
ABS/PC |
|
Colour: |
White |
|
Recommended wiring cable: |
Stranded cable up to 16 AWG - 1.5 mm² |
|
Norm conformity: |
This product conforms to all applicable European Union legislation. Please refer to the Declaration of Conformity for further information. |
Specifications are subject to changes without prior notice – Measured in specific conditions.
Intentional contactless sensor
Surface mounting contactless sensor with degree of protection IP65
Surface mounting box for the MAGIC SWITCH
Adapter for GIRA and JUNG products