Supply voltage: |
12V to 24V AC ±10%; 12V to 24V DC +10% / -3% The Equipment must be powered by an approved Class II SELV limited power source. This requirement consists of the need for double insulation between primary voltages and the Equipment supply. The supply current should be limited to max 3A. |
|---|---|
Power consumption: |
< 3.5 W / VA |
Mains frequency: |
50 to 60 Hz |
Output: |
2 relays (free of potential change-over contact) |
Output holdtime: |
0.5 s |
Mounting height: |
2.5 m - 6 m* |
Temperature range: |
from -30 °C to + 60 °C |
Humidity: |
0 - 95% non condensing |
Degree of protection: |
IP65 |
Dimensions: |
127 mm (L) x 102 mm (H) x 96 mm (W) |
Materials: |
ABS and polycarbonate |
Weight: |
400 g |
Cable lenght: |
10 m |
Technology: |
active infrared |
Transmitter frequency/wavelength: |
875 nm |
Transmitter power density: |
< 250 mW/m² |
Detection mode: |
motion & presence |
Detection field: |
4 m x 4 m (emitting spots**) |
Min. detection speed: |
5 cm/s to activate detection |
Reaction time: |
250 ms |
Tilt angle: |
15° - 45° |
Norm conformity |
This product conforms to all applicable European Union legislation. Please refer to the Declaration of Conformity for further information. |
* depending on size and nature of target
** zone detected by Spotfinder, slightly bigger than actual detection field
Specifications are subject to changes without prior notice – Measured in specific conditions.