SEAGLE

Opening sensor for all types of automatic doors

Technology Radar

Colours:

SEAGLE opening sensor for all types of automatic doors

Description

The SEAGLE is a microwave sensor which can be mounted on all types of automatic doors, irrespective of the surroundings. The SEAGLE ONE is a unidirectional motion sensor with a narrow detection field by default. The SEAGLE TWO is a bidirectional motion sensor with a wide detection field. Configuration of basic functions is possible via DIP-Switches and potentiometer.

Download the commercial sheet

Features

Stability & reliability

Thanks to the BEA planar antenna and its unidirectional detection mode, the SEAGLE ONE offers an high level of stability and reliability.

Energy-saving

Improvement of the energy efficiency of buildings thanks to the unidirectional radar of the SEAGLE ONE, which detects approaching movements and filters out movements moving away: the door closes earlier and reduces heat loss.

Plug & play

Adjustment of basic functions with DIP-switch

Flexibility

Adjustable detection field sizes

Detection field

SEAGLE 1

SEAGLE 2

Table of specifications

Technology:	microwave doppler radar
Transmitter frequency:	24.150 GHz
Transmitter radiated power:	< 20 dBm EIRP
Transmitter power density:	< 5 mW/cm²
Detection mode:	motion
Min. detection speed:	5 cm/s (measured in sensor axis)
Supply voltage:	12 V to 24 V AC ±10%; 12 V to 24 V DC +30% / -10%
Mains frequency:	50 to 60 Hz
Max power consumption:	< 2 W
Output: Max. contact voltage: Max. contact current: Max. switching power:	relay (free of potential change-over contact) 42 V AC/DC 1 A (resistive) 30 W (DC) / 42 VA (AC)
Mounting height:	from 1.8 m to 3 m
Degree of protection:	IP54
Temperature range:	from -20 °C to + 55 °C
Dimensions:	120 mm (L) x 80 mm (H) x 50 mm (W)
Tilt angles:	0° to 90° vertical; -30° to +30° lateral
Material:	ABS
Weight:	SEAGLE ONE: 165 g SEAGLE TWO: 120 g
Cable length:	2.5 m
Norm conformity:	This product conforms to all applicable European Union legislation. Please refer to the Declaration of Conformity for further information.